Krehalon and Dunbia Develop a Single-Polymer Protein Pack for Co-op in the UK | News | Krehalon

Product range: USA - Preferred language: English

Part of the Kureha Group


Krehalon and Dunbia Develop a Single-Polymer Protein Pack for Co-op in the UK

The current format of choice for modified atmosphere protein packaging traditionally uses polythene (PE) sealing mechanisms to enable secure seal of the film lid to the amorphous polyethylene terephthalate (APET) – most common hard plastic used for food stuffs. This is a complex multi-material structure which makes protein packs more difficult to readily recycle.

Driven by Co-op’s ‘80% easy to recycle by 2020’ ambition, the key focus of the Dunbia-Krehalon partnership was to help simplify Co-op’s packaging for minced beef to one polymer type and help increase recycling at consumer level.

As a result, Krehalon-Dunbia developed a simplified pack structure using a specialist top web film (KreLid™ Mono) which enabled the removal of the PE sealant layer and achieved a strong fused seal to the mono-APET base.

Coop-Krehalon-Dunbia-Mince-Pack-1 Mono Structure,

The new alternative offers superior environmental benefits without compromising seal strength, food safety, pack integrity and product shelf life. The unique high barrier top film also includes anti-fog properties for optimum pack clarity and visual appeal.

‘Sealing to a mono APET layer, unsupported by a PE sealant layer, was a challenging project as it required for us to come up with a radical alternative to PE sealing mechanisms whilst maintaining strong hermetically sealed packs. 

After months of development work, however, involving shelf life, transit and store trials, the move to a mono-based pack was made possible by using our specialist top web film with advanced sealing technology.’ 

– shares Krehalon

Dunbia were able to use their current manufacturing equipment without any modifications and experience no reduction in production output or machine efficiencies from switching to the new format. 

The success of this innovative packaging development demonstrates that film technology is now available for retailers to consider the removal of PE in their pre-formed trays or thermoformed pack formats to simplify their recycling chain whilst offering tight hermetically sealed packs equivalent to the strength of a PE-to-PE bond but with improved clarity and visual pack appearance. 

‘The Mono-APET project has been a great step forward in our ambition to make all of our packaging easy to recycle. By simplifying the plastic trays used for protein to just one polymer type, we have been able to make Co-op branded packaging more attractive to recyclers and, therefore, more likely to be recycled.’ 

– Rob Thompson, Packaging Technologist at the Co-op

Enabling the use of a mono base web not only makes protein packaging easier to recycle but also has the potential to reduce pack costs due to the potential downgauging that could be achieved from the removal of the PE sealant layer. In short, the same pack quality can be achieved at a reduced total pack weight and causing less harm to the environment. 

There is much more potential to this development in the future. Future opportunities within this project include the ability to fully sandwich print the top film to remove the need of labels (or other added surface decoration) offering even further environmental and cost benefits. 

Moreover, when sealed to CPET structures, the film is also approved for “direct to oven” applications (200 degrees for 2 hours) offering additional convenience. 

Back to news